Kodak brownie camera manual

.
.
Download / Read Online Kodak brownie camera manual
.
.
.

.
You forgot to enter some search keywords. You forgot to enter some search keywords. Sorry but this item is currently unavailable. Please check back at a later stage. ThAlso view the frequenty asked questions at the bottom of the page for useful tips about your product. We use cookies and other data collection technologies to provide the best experience for our customers. Read the entire instruction manual before starting the installation. Images are for illustration purposes only. Actual models may differ slightly. Improper installation, adjustment, alteration, service, maintenance, or use can cause an explosion, fire, electrical shock, or other conditions which may cause death, personal injury, or property damage. Refer to the individual instructions packaged with kits or accessories when installing. Wear safety glasses, protective clothing, and work gloves. Have a fire extinguisher available. Read these instructions thoroughly and follow all warnings or cautions included in the literature and attached to the unit. In Canada, refer to the current editions of the Canadian Electrical Code CSA C22. This is the safety alert symbol. When you see this symbol on the unit and in instruction manuals, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, and CAUTION. These words are used with the safety alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards that could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions that will result in enhanced installation, reliability, or operation. Failure to follow this warning could result in personal injury or death. Before installing, modifying, or servicing the system, the main electrical disconnect switch must be in the OFF position. Lockout and tag switch with a suitable warning label. Never use air or gases containing oxygen for leak testing or operating refrigerant compressors. Pressurized mixtures of air or gases containing oxygen can lead to an explosion. Failure to follow this caution may result in equipment damage or improper operation. If any section of pipe is buried, there must be a 6 in. If more than the recommended length is buried, the refrigerant may migrate to the cooler buried section during extended periods of system shutdown. Use all of the installation parts and accessories to install the system. Improper installation may result in water leakage, electrical shock and fire, or cause the equipment to fail. Keep the installation manual in a safe place and do not discard any other accessories until the installation work has been completed. These parts must be purchased separately. Illustrations in this manual are for reference only. The actual shape of the indoor unit and parts may differ slightly. If the outdoor unit is higher than the indoor unit, prevent rain from flowing into the indoor unit along the connection pipe by making an inverted trap in the connection pipe before it enters the wall to the indoor unit. This ensures that rain drips from the connection pipe before it enters the wall. Piping and the interconnecting wiring are field supplied. Different models may differ slightly. The units listed in Table 3 are addressed in these installation instructions. The installation must be performed in accordance with the requirement of local and national standards. The installation may differ slightly in some areas. Different models have different front panels and display windows. Allow sufficient space for airflow and unit service. The main power is supplied to the outdoor unit. Two wires are high voltage AC power, one is communication wiring and the other is a ground wire. Wiring between the indoor and outdoor unit is polarity sensitive. The use of BX wire is NOT recommended. Wires should be sized based on NEC and local codes. Be sure to comply with local codes while running a wire from the indoor unit to the outdoor unit. Every wire must be connected firmly. Loose wiring may cause the terminal to overheat or result in unit malfunction. Ensure all wiring is tightly connected. No wire should touch the refrigerant tubing, compressor or any moving parts. Disconnecting means must be provided and shall be located within sight and readily accessible from the air conditioner. Connecting cable with conduit shall be routed through the hole in the conduit panel. When disconnecting the power of the outdoor unit, the indoor unit would lose power. A 3 pole disconnect may be used for extra protection between the Indoor and Outdoor units. Before installing the indoor unit, ensure compatibility with the outdoor unit using the product data as a reference. It is also necessary to confirm the proper application of the equipment and to perform a heat load calculation for proper sizing. Unpack the unit and move to the filexlib.
.
Kodak brownie camera manual
Kodak brownie camera owner manual
Kodak brownie camera service guide
Kodak brownie camera instruction
Kodak brownie camera manual